When creating an island for the robot mower to avoid, the two wires between the island and the perimeter of the property must be twinned in order to cancel the signal and make the wires invisible to the robot.
When there is a great distance between these two points, burying the wires by hand (on your knees) will cause a considerable time loss. Not anymore! Thanks to the new WIRE TWINNING DEVICE, you can now bury both wires at the same time after going around the island with the machine.
A diverting plate leads the wire laying on the surface towards a second wire guide installed behind the regular wire guide. An ingenius system then frees the surface wire once the perimeter is reached, which allows to continue to install without stopping.
This new accessory, available as an option, is installed on the 600MH in minutes and is also compatible with all the machines built since 2016.
NOTE: For use with wire up to 3 mm diameter maximum.
Click here to download the instructions.
Type a value in the Millimeters field to convert the value to Imperial: